LC4500UV/B Industrial Projector
The FlexLight™ LC4500UV projector is a production-ready, full-featured implementation of the Texas Instruments DLP4500 chipset, which includes the DLPC350 and 0.45″ WXGA DMD .
The LC4500UV provides a full color, high resolution projector for your 3D measurement and display applications using the Texas Instruments DLP4500 chipset. An on-axis projection lens with a 1.2 throw-ratio provides excellent uniformity; and short focus capability enables a wide range of applications, starting with 3D printing.
The unit is powered by our LC4500-EKT controller and fully compatible with the Texas Instruments DLP LightCrafter™ 4500 toolset. If you need full networking support using Ethernet, or want to build your own embedded application, just plug in a BeagleBone Black or BeagleBone Green and download our toolset. If you prefer an alternate solution, you can use our LC4500PEM application, which supports built in non-uniformity correction to ensure consistent exposure power across the optical field.
The LC4500 controller provides a direct interface for the popular BeagleBone Black development platform based on a AM335x ARM® Cortex A8 processor, providing users with the capability to create patterns in real-time and stream them directly into the projector. An MSP430 micro-controller is integrated on the main control board, allowing customized configurations and modes of the DLP chipset.
- High Grade Optical Engine, >85% Uniformity
- 0% offset optics (on-axis projection lens)
- Texas Instruments DLP4500 WXGA DMD with >1 million pixels
- 1.2:1 throw ratio
- Up to 2 W at 405 nm or 60 lumens at 465 nm LED.
- mini-HDMI connector (no HDCP)
- USB 2.0 or UART control interface
- Configurable general purpose I/O
- DLP 0.45 WXGA chipset (high-power FQD DMD)
- UV/B LED light engine with 405nm LED standard
460nm LED or other wavelengths may be substituted.
- DMD Drive board
(power supply not included)
Click below for more information on the chipset information used in the LC4500 family: